Try our new documentation site (beta).


callback_c++.cpp


/* Copyright 2023, Gurobi Optimization, LLC */

/*
   This example reads a model from a file, sets up a callback that
   monitors optimization progress and implements a custom
   termination strategy, and outputs progress information to the
   screen and to a log file.

   The termination strategy implemented in this callback stops the
   optimization of a MIP model once at least one of the following two
   conditions have been satisfied:
     1) The optimality gap is less than 10%
     2) At least 10000 nodes have been explored, and an integer feasible
        solution has been found.
   Note that termination is normally handled through Gurobi parameters
   (MIPGap, NodeLimit, etc.).  You should only use a callback for
   termination if the available parameters don't capture your desired
   termination criterion.
*/

#include "gurobi_c++.h"
#include <fstream>
#include <cmath>
using namespace std;

class mycallback: public GRBCallback
{
  public:
    double lastiter;
    double lastnode;
    int numvars;
    GRBVar* vars;
    ofstream* logfile;
    mycallback(int xnumvars, GRBVar* xvars, ofstream* xlogfile) {
      lastiter = lastnode = -GRB_INFINITY;
      numvars = xnumvars;
      vars = xvars;
      logfile = xlogfile;
    }
  protected:
    void callback () {
      try {
        if (where == GRB_CB_POLLING) {
          // Ignore polling callback
        } else if (where == GRB_CB_PRESOLVE) {
          // Presolve callback
          int cdels = getIntInfo(GRB_CB_PRE_COLDEL);
          int rdels = getIntInfo(GRB_CB_PRE_ROWDEL);
          if (cdels || rdels) {
            cout << cdels << " columns and " << rdels
                 << " rows are removed" << endl;
          }
        } else if (where == GRB_CB_SIMPLEX) {
          // Simplex callback
          double itcnt = getDoubleInfo(GRB_CB_SPX_ITRCNT);
          if (itcnt - lastiter >= 100) {
            lastiter = itcnt;
            double obj = getDoubleInfo(GRB_CB_SPX_OBJVAL);
            int ispert = getIntInfo(GRB_CB_SPX_ISPERT);
            double pinf = getDoubleInfo(GRB_CB_SPX_PRIMINF);
            double dinf = getDoubleInfo(GRB_CB_SPX_DUALINF);
            char ch;
            if (ispert == 0)      ch = ' ';
            else if (ispert == 1) ch = 'S';
            else                  ch = 'P';
            cout << itcnt << " " << obj << ch << " "
                 << pinf << " " << dinf << endl;
          }
        } else if (where == GRB_CB_MIP) {
          // General MIP callback
          double nodecnt = getDoubleInfo(GRB_CB_MIP_NODCNT);
          double objbst = getDoubleInfo(GRB_CB_MIP_OBJBST);
          double objbnd = getDoubleInfo(GRB_CB_MIP_OBJBND);
          int solcnt = getIntInfo(GRB_CB_MIP_SOLCNT);
          if (nodecnt - lastnode >= 100) {
            lastnode = nodecnt;
            int actnodes = (int) getDoubleInfo(GRB_CB_MIP_NODLFT);
            int itcnt = (int) getDoubleInfo(GRB_CB_MIP_ITRCNT);
            int cutcnt = getIntInfo(GRB_CB_MIP_CUTCNT);
            cout << nodecnt << " " << actnodes << " " << itcnt
                 << " " << objbst << " " << objbnd << " "
                 << solcnt << " " << cutcnt << endl;
          }
          if (fabs(objbst - objbnd) < 0.1 * (1.0 + fabs(objbst))) {
            cout << "Stop early - 10% gap achieved" << endl;
            abort();
          }
          if (nodecnt >= 10000 && solcnt) {
            cout << "Stop early - 10000 nodes explored" << endl;
            abort();
          }
        } else if (where == GRB_CB_MIPSOL) {
          // MIP solution callback
          int nodecnt = (int) getDoubleInfo(GRB_CB_MIPSOL_NODCNT);
          double obj = getDoubleInfo(GRB_CB_MIPSOL_OBJ);
          int solcnt = getIntInfo(GRB_CB_MIPSOL_SOLCNT);
          double* x = getSolution(vars, numvars);
          cout << "**** New solution at node " << nodecnt
               << ", obj " << obj << ", sol " << solcnt
               << ", x[0] = " << x[0] << " ****" << endl;
          delete[] x;
        } else if (where == GRB_CB_MIPNODE) {
          // MIP node callback
          cout << "**** New node ****" << endl;
          if (getIntInfo(GRB_CB_MIPNODE_STATUS) == GRB_OPTIMAL) {
            double* x = getNodeRel(vars, numvars);
            setSolution(vars, x, numvars);
            delete[] x;
          }
        } else if (where == GRB_CB_BARRIER) {
          // Barrier callback
          int itcnt = getIntInfo(GRB_CB_BARRIER_ITRCNT);
          double primobj = getDoubleInfo(GRB_CB_BARRIER_PRIMOBJ);
          double dualobj = getDoubleInfo(GRB_CB_BARRIER_DUALOBJ);
          double priminf = getDoubleInfo(GRB_CB_BARRIER_PRIMINF);
          double dualinf = getDoubleInfo(GRB_CB_BARRIER_DUALINF);
          double cmpl = getDoubleInfo(GRB_CB_BARRIER_COMPL);
          cout << itcnt << " " << primobj << " " << dualobj << " "
               << priminf << " " << dualinf << " " << cmpl << endl;
        } else if (where == GRB_CB_MESSAGE) {
          // Message callback
          string msg = getStringInfo(GRB_CB_MSG_STRING);
          *logfile << msg;
        }
      } catch (GRBException e) {
        cout << "Error number: " << e.getErrorCode() << endl;
        cout << e.getMessage() << endl;
      } catch (...) {
        cout << "Error during callback" << endl;
      }
    }
};

int
main(int   argc,
     char *argv[])
{
  if (argc < 2) {
    cout << "Usage: callback_c++ filename" << endl;
    return 1;
  }

  // Open log file
  ofstream logfile("cb.log");
  if (!logfile.is_open()) {
    cout << "Cannot open cb.log for callback message" << endl;
    return 1;
  }

  GRBEnv *env = 0;
  GRBVar *vars = 0;

  try {
    // Create environment
    env = new GRBEnv();

    // Read model from file
    GRBModel model = GRBModel(*env, argv[1]);

    // Turn off display and heuristics
    model.set(GRB_IntParam_OutputFlag, 0);
    model.set(GRB_DoubleParam_Heuristics, 0.0);

    // Create a callback object and associate it with the model
    int numvars = model.get(GRB_IntAttr_NumVars);
    vars = model.getVars();
    mycallback cb = mycallback(numvars, vars, &logfile);

    model.setCallback(&cb);

    // Solve model and capture solution information
    model.optimize();

    cout << endl << "Optimization complete" << endl;
    if (model.get(GRB_IntAttr_SolCount) == 0) {
      cout << "No solution found, optimization status = "
           << model.get(GRB_IntAttr_Status) << endl;
    } else {
      cout << "Solution found, objective = "
           << model.get(GRB_DoubleAttr_ObjVal) << endl;
      for (int j = 0; j < numvars; j++) {
        GRBVar v = vars[j];
        double x = v.get(GRB_DoubleAttr_X);
        if (x != 0.0) {
          cout << v.get(GRB_StringAttr_VarName) << " " << x << endl;
        }
      }
    }

  } catch (GRBException e) {
    cout << "Error number: " << e.getErrorCode() << endl;
    cout << e.getMessage() << endl;
  } catch (...) {
    cout << "Error during optimization" << endl;
  }

  // Close log file
  logfile.close();

  delete[] vars;
  delete env;

  return 0;
}

Try Gurobi for Free

Choose the evaluation license that fits you best, and start working with our Expert Team for technical guidance and support.

Evaluation License
Get a free, full-featured license of the Gurobi Optimizer to experience the performance, support, benchmarking and tuning services we provide as part of our product offering.
Academic License
Gurobi supports the teaching and use of optimization within academic institutions. We offer free, full-featured copies of Gurobi for use in class, and for research.
Cloud Trial

Request free trial hours, so you can see how quickly and easily a model can be solved on the cloud.

Search

Gurobi Optimization